Flex Super Wide Duct Tape is no ordinary duct tape. It’s up to 300% wider than standard duct tape. It has a tough reinforced cloth backing with excellent abrasion resistance that’s water, weather, and UV resistant. It’s made with a powerful, thick, r
Flex Duct Tape has high elongation for conformability and offers better adhesion on uneven surfaces. Compared to the standard 1.88” duct tape, it is also up to 300% wider. It has a tough reinforced cloth backing with excellent abrasion resistance.
Flex Duct Tape can be applied at temperatures up to 200 Degrees.
Flex Duct Tape adheres to virtually all types of surfaces. It may not bond to certain siliconized material, water-repellent or some porous surfaces, such as raw unpainted wood, concrete, cinder block, and brick. The surface should be free of grease,
Before using Flex Duct Tape, the surface must be clean, dry, and free of any grease, oil, dirt, or debris. Use firm pressure and allow the tape to remain on the surface. Use your fingers, squeegee, or roller and press firmly to remove any creases, fo
Start at one corner of the tape and lift the edge of the tape up, then continue to pull until you get the desired length. Try not to let the tape fold in on itself as you unroll the amount you need.
To tear, make sure your hands are dry. Firmly grab the area to be torn with both hands close together and quickly pull the tape apart, making sure the tape does not fold in on itself.
Yes. Even though our powerful adhesive is super strong, it can still be removed and repositioned. Constant repositioning may eventually impact adhesion.
Store the product horizontally on its backing in a cool, dry environment. Avoid storing in an upright position.
Yes. Flex Duct Tape has a tough reinforced backing that is water, weather, and UV resistant.
Flex Duct Tape is not intended to be applied on wet surfaces or continuously submerged underwater.
Flex Duct Tape is not recommended to be used around food or in contact with drinking water.
Yes. Once applied, Flex Duct Tape can be painted over.
When applying to fabric, use firm pressure and allow the tape to remain on the surface for an extended period of time. Apply to both sides of the fabric when possible.
Any remaining residue can be removed with Adhesive Remover.
Flex Duct Tape comes in Black, White, and Gray. You can get rolls in either 4.6” x 20’ or 7.5” x 20’.